Part of the  

Solid State Technology

  Network

About  |  Contact

Archive for August, 2016

Patterning with Films and Chemicals

Wednesday, August 24th, 2016

Somewhere around 40nm is the limit on the smallest half-pitch feature that can be formed with a single-exposure of 193-nm wavelength laser light using water immersion (193i) lithography. While multiple-patterning (MP) is needed to achieve tighter half-pitches, smaller features at the same pitch can be formed using technology extensions of 193i. “Chemistry is key player in lithography process,” is the title of a short video presentation by Dow Electronic Materials corporate fellow Peter Trefonas now hosted on the SPIE website (DOI: 10.1117/2.201608.02).

Trefonas as been working on chemistries for lithography for decades, including photoresists, antireflectant coatings, underlayers, developers, ancillary products, and environmentally safer green products. He is an inventor on 61 US patents, has over 25 additional published active U.S. patent applications, is an author of 99 journal and technical publications, and is a recipient of the 2014 ACS Heroes of Chemistry Award and the 2013 SPIE C. Grant Willson Best Paper Award in Patterning Materials and Processes. Now a Senior Member of SPIE, he earned his Ph.D. in inorganic chemistry with Prof. Robert West at the University of Wisconsin-Madison in 1985.

Trefonas explains how traditional Chemically-Amplified (CA) resists are engineered with Photo-Acid Generators (PAG) to balance the properties for advanced lithography. However, in recent years the ~40-nm half-pitch resolution limit has been extended with chemistries to shrink contact holes, smooth line-width roughness, and to do frequency-multiplication using Directed Self-Assembly (DSA). All of these resolution extension technologies rely upon chemistry to create the final desired pattern fidelity.

—E.K.

ASM’s Haukka ALD Award

Monday, August 1st, 2016

Dr. Suvi Haukka, executive scientist at ASM International, located in Finland, was awarded the ALD Innovation prize at the ALD 2016 Ireland conference (Figure), as chosen by the conference chairs. Haukka has had a lifetime career in Atomic Layer Deposition (ALD), starting at Microchemistry Ltd. with ALD pioneer Dr. Tuomo Suntola in 1990, and now holding over 100 patents.

Conference co-chairs Simon Elliott, Tyndall National Institute of Ireland (left) and Jonas Sundqvist, Lund University of Sweden (right) acknowledge Suvi Haukka from ASM International N.V. (center) as recipient of the "ALD Innovation Prize" at the 16th International Conference on Atomic Layer Deposition (ALD 2016) held last month in Dublin, Ireland. (Source: ALD 2016) Conference co-chairs Simon Elliott, Tyndall National Institute of Ireland (left) and Jonas Sundqvist, Lund University of Sweden (right) acknowledge Suvi Haukka from ASM International N.V. (center) as recipient of the “ALD Innovation Prize” at the 16th International Conference on Atomic Layer Deposition (ALD 2016) held last month in Dublin, Ireland. (Source: ALD 2016)

Since ASM bought Microchemistry in 1999, Haukka has worked on the manufacturability of ALD processes for the semiconductor industry. Today, ALD technology is essential for the high-volume manufacturing (HVM) of advanced ICs, with growing demand for the fabrication of nanoscale 3D devices such as finFETs and 3D-NAND Flash cells.

As reported by Riikka Puurunen in his ALD History Blog, Haukka joins a short list of technology luminaries who have been previous recipients of the prize:
* 2011 Roy Gordon (Harvard University),
* 2012 Markku Leskelä (University of Helsinki),
* 2013 Steven George (University of Colorado),
* 2014 Hyeongtag Jeon (Hanyang University), and
* 2015 Gregory Parsons (North Carolina State University).

More on the ALD 2016 conference can be read in the travel report blog.

[DISCLAIMER:  Ed Korczynski and Jonas Sundqvist also work for TECHCET CA, and were co-chairs of the 2016 Critical Materials Conference.]

—E.K.